Soil acidification
leads to crop failures and forest dieback.
In-depth analysis
Water temperature distribution profiles and the chemical composition of the exhaust gases in the heat exchanger have been optimised.
Technology at the highest level
ELCO is investing heavily in research and development to ensure that its proven stainless steel heat exchangers will continue to offer the best efficiency, outstanding reliability and excellent performance over their entire lifespan.
Efficient heat transfer
Specially designed hydraulic chambers ensure that the water turbulence delivers maximum heat transfer at the lowest possible pressure drop.
Ultimate efficiency
Thanks to their high condensation rate, ELCO gas condensing boilers achieve A and A+ ratings under the ErP classification, even at full load.
Optimised combustion zones!
By managing specific zones with contrasting requirements, a maximum energy yield can be achieved with extremely low emissions. In zone 1, temperatures rise to over 1,000°C, making NOx formation almost impossible. Thanks to a fast flow and a rapid temperature drop, flue gas temperatures are kept above 600°C, enabling optimal CO formation. Condensation and transfer of the remaining flue gas energy occurs at around 56°C in zone 3.
HEX3 boiler technology
ELCO uses the same burner and heat exchanger technology across the entire premium boiler range from 2.0 kW to 2 MW.
Emissions reduction
From our largest commercial appliances to the premium range of our domestic boilers, all ELCO products are designed to significantly reduce NOx emissions. ELCO products are 60% below the EU limit for NOx emissions.
Consequences of NOx emissions
The effects of NOx pose a health hazard and damage the environment.
